Montcalm Pumping Station Upgrades
The Montcalm Pumping Station Upgrades included construction of a below grade flow meter chamber, installation of new wastewater pumping units and replacement of the stations entire electrical, controls, and mechanical systems.
electrical and controls installation, control panel construction, programing, SCADA integration, calibration, testing and commissioning. The electrical system included installation of a new 800A switchboard, control panels, 100 hp VFD panels , reconstruction of an existing MCC, instrumentation, and base building electrical systems.
The controls system included a SCADA Pac RTU, Magelis HMI, Endress and Hauser Instrumentation (RTD Temp. Transmitters, Hydrostatic Level Transmitter, and Magnetics Flow meters,) VFD’s and Soft Starters. PLC and HMI Programming was provided for the pumping systems, lighting, and ventilation system was provided according to customer’s functional specification and programming standards. System interface is provided via the local HMI and integration with the City of Winnipeg Central Clear SCADA system. The integration was provided via a telephone and wireless connection.
South End Water Pollution Control Centre
Purpose of this contract was to upgrade devices in classified areas to Class 1 Zone 2 requirements. Some of these devices were, lighting, CCTV camera’s, garage door openers, valve actuators, pushbutton stations, light switches, and welding receptacles.
The SEWPCC Ventilation upgrades major components were installation of a new ventilation system for the wet well and electrical room. Tri-Star automation was the Electrical and Controls Contractor this project; our scope included electrical and controls installation, control panel construction, programing, SCADA
integration, calibration, testing and commissioning. The electrical scope included construction of control panels, and VFD panels, modifications to the existing MCC, the installation of control panels, instrumentation, cable tray, teck cable air pressure sensors and stainless steel tubing.
The controls system included Modicon M340 PLC’s, and HMI, Endress and Hauser Instrumentation (RTD Temp. Transmitters, Hydrostatic Level Transmitter, Thermal Mass Flowmeters, Differential Pressure Transmitters) Magnetrol Thermal Dispersion Switches, United Differential Pressure Switches.
Programming was provided according to customer’s functional specification and programming standards. System interface is provided via the local HMI and integration with the plant ABB DCS. We also provided a Modbus Integration with existing power monitoring and gas detection equipment.
Thompson Water Treatment Plant Upgrades
The project will provide the customer with an upgraded water treatment plant with improved process and environmental control.
The following are items some items off upgrade:
- PACL Skid and control Panel
- Polymer Skid and control panel
- Chlorine Scrubber and Sensor Unit Upgrade
- HRU and MAU Unit Upgrades
- MCC replacement and upgrade
- CCTV System Upgrade
- Valves, Actuators, Flow meters, Mag meters upgrade